Solution 1:
First solution: check the power. Yes, I know it's obvious, but if the fuse has gone in the plug, if the cable is loose or if you've overlooked a second power switch, this might be your problem. If you have any indication of power at all (e.g. power light), you can discount this. Alternative Solution: Is the plug in/on also have you checked the cables are in correctly (it's worth checking them over) 0 out of 0 people found this solution helpful.
Problem: How do I connect my computer to my TV? I can't seem to get any sound.
There are 0 comments on this problem.
Solution 1:
You might need to send a separate audio cable to your TV, even if you're connecting via HDMI. 0 out of 0 people found this solution helpful.
Problem: I get a green or blue screen, but I can hear the sound coming from the TV channel.
There are 0 comments on this problem.
Solution 1:
Golden rule 1: Change channel and see if you can change back and make it work. Golden rule 2: Turn it off and on again. 0 out of 0 people found this solution helpful.
Problem: Picture has speckles or sparkles while watching.
There are 0 comments on this problem.
Solution 1:
This is likely to be a cable problem. Try with a different cable if you have one handy. Cheaper cables are more likely to do this, particularly if they are quite long (over 5 metres) 0 out of 0 people found this solution helpful.
Problem: Picture comes on, then goes off, sometimes flickers.
There are 0 comments on this problem.
Solution 1:
Probably a loose cable connection. Try fiddling around with the cable while it's on and see if it helps. 0 out of 0 people found this solution helpful.
Problem: The on switch crackles and have to swich on on off many times before the power light comes on. Is this fixable.
There are 0 comments on this problem.
Solution 1:
I have the same problem plus I have two young kids 8-6 an I'm worried there going to get electrocuted wtf is wrong someone help 0 out of 1 person found this solution helpful.
Problem: I have power n the green light is on but blank screen
There are 0 comments on this problem.
Solution 1:
this is going to sound crazy. but have you tried loosening the screws that hold the stand on? honestly i know it sounds nuts. but that was the cause of my issue. 0 out of 1 person found this solution helpful.
Problem: Bought my tv yesterday set it up but no light looks like no power - no standby light nothing
There are 0 comments on this problem.
Solution 1:
There is a switch under the light, turn that on. It's seems obvious but it's not too easy to notice it 9 out of 11 people found this solution helpful.
Problem: The picture is very poor on freeview. I get interference, blocks appearing, clicking sounds and a generally unwatchable picture.
There are 0 comments on this problem.
Solution 1:
This sounds like a poor signal. Go into the menu and see if you can check the signal strength. To solve this, you will need to either (1) Retune your TV to a more local transmitter, (2) Improve / reposition your TV aerial, or (3) Check the cable that connects your TV to the aerial - replacing this will be easier and cheaper that replacing the antenna. 1 out of 2 people found this solution helpful.
Problem: I have a problem with the sound, which crackles and goes on and off
There are 0 comments on this problem.
Solution 1:
Nstand by light on but no picture 14 month old seems a common problem for a cheap tv on 32 inch models 0 out of 0 people found this solution helpful.
Post a new question about the Blaupunkt BLA46/191N
All problems on this page have been submitted and answered by users. If you have a problem with the Blaupunkt BLA46/191N, please submit it below and we'll post it here.
Solve an unsolved problem for the Blaupunkt BLA46/191N
Can you help?
If you can solve a currently unsolved problem, please select the problem you can solve from the list below. Even if you can't solve it, you can still comment on problems if you think it would help.
Problem: TV won't come on. It alternates between on/off every few seconds all by itself.. have switched off at mains, still doing it. Changed remote batteries, still doing it......going crazy here watching the Blaupunkt logo come on screen with blue light on the on/off.. then it switches to blank screen and red light..
Problem: Blaupunkt 42 lcd 3d. No problems with all other functions or screen. I use ps4 ps3 skybox. My 3d has been working with same set up. Last night watching 3d the screen started pulsing every min or so. I turned up vol of amp with remote then yellow and black vertical lines appeared at top of screen with some other distortion and appear every min or so. I switch off bluray player but it still happens. I have tried various bluray 3d disks same prob. I have tried my ps3 and ps4 same issue. I removed amp and put hdmi direct into tv and issu still happened. Bit stuck now any ideas?
Problem: My TV was working fine today for 30 minutes then it suddenly went off. I switched the TV off on remote and mains and after a few seconds switched back on. Left the screen (blue) to run for a while pressed sky button had sound still blue screen and no picture. I have repeated this procedure several times but still no change. I have checked all leads all fine. What is the problem? this TV is only 5 months old.
If you have a problem and the TV is under a year old, contact your retailer to arrange a repair or replacement. Under the Sale of Goods Act, you should be covered for at least a year and maybe longer.
TV repairs have changed a lot over the years and although modern TVs are much more complicated than traditional TVs, they are still repairable. Often, there is a simple solution, so make sure you try everything before taking your TV apart or paying for repairs.
Solutions suggested on this site are for informational purposes only; we accept no responsibility for any damage or financial loss caused as a result of following the advice shown here.